What We Fix
- Induction elements that cut out, will not detect pans, or throw error codes.
- Gas burners that click without lighting, or click constantly after lighting.
- Elements stuck on one power level, or that will not adjust.
- Cracked or chipped ceramic-glass tops.
- Touch controls that miss inputs or lock up.
- Downdraft ventilation faults on cooktops that include it.
Common Problems and Typical Causes
| Symptom | Typical Cause | What We Do |
|---|---|---|
| Induction element cuts out | Cooling fan, overheated coil or power board | Test the fan and power stage, replace the failed part |
| Won't detect cookware | Non-magnetic pan or coil sensor | Confirm cookware, test the coil and sensor |
| Gas burner clicks, no flame | Fouled igniter or moisture under the cap | Dry, clean and test the spark system |
| Constant clicking | Stuck spark switch | Replace the switch and dry the burner area |
| Cracked glass | Impact or thermal stress | Replace the glass top and test the elements |
Induction Needs the Right Pan
An induction cooktop only heats magnetic cookware. If a single new pan will not heat while others do, the pan is likely the issue, not the cooktop. When several elements misbehave together, the fault is usually in the cooling or power hardware, and that is where we look.
Brands We Service
We repair cooktops from Wolf, Thermador, Gaggenau, Bosch, Miele, Viking and Dacor.
Element Dropping Out?
Book a diagnostic visit. Diagnostic and travel fees, if applicable, are confirmed before the appointment and before repair approval.
Frequently Asked Questions
Why Does My Induction Element Keep Shutting Off?
Induction elements cut out to protect themselves from overheating or when they cannot detect suitable cookware. Common causes are a cooling-fan fault, an overheated coil or power board, or a pan that is not induction-compatible.
Can a Cracked Glass Cooktop Be Replaced?
Yes. A cracked ceramic-glass top is a replaceable part. We source the correct glass for your model and swap it, then verify the elements underneath still function.
Why Does My Gas Cooktop Burner Click Constantly?
Constant clicking usually means a switch or igniter is staying energized, often from moisture under a burner cap or a failed spark switch. We dry and clean the area and replace the faulty switch if needed.
Related
Burner Not Igniting
Gas ignition faults across brands.
Range Repair
Cooktop and oven faults on pro ranges.
Thermador Repair
Freedom induction and Masterpiece cooktops.